VelociRAX 3X

- Hinge assist dampers for fully loaded hinging
- Garage wall mounting kit
- Built-in anti-rattle mechanism
- VelociRAX tire straps
- Rubber bands for brake lever engagement
- 12.7 mm (1/2 inch) hitch pin with keyed lock
- All needed hardware
- Assembly and Use Instructions​

- 15-inch spacing between bikes
- Hitch mounted vertical bike rack holding up to 3 bikes
- Assembled width 42 inches
- Assembled height 58 inches
- Weight 73 lbs
- Load capacity 230 bike pounds at 55 pounds per bike max
- eBike ready: 3 standard ebikes (we recommend removing batteries if you are able)
- Do not go through automated car washes with rack attached to vehicle

- 86mm (3 3/8 inch) depth past center of hitch pin hole to insert a VelociRAX
- 50mm (2-inch) Class III  hitch with tongue capacity of 227 kg (500 lbs)

** Note - Check factory OEM hitch receivers on newer Subaru CrossTrek and Outback and Ford Ranger as they may lack sufficient depth on the factory hitch receiver.

-RVs/Trailers: need to have a Class III 2-inch hitch receiver with a tongue weight capacity of 500 lbs at a minimum (bumper hitches, extension hitches, and hitches with cantilevered sections allow too much hitch movement and are inadequate). One item to check is if a ladder could possibly interfere with the rack. Trailers and RVs produce extreme forces on racks and bikes. Take extra care to strap tight and use rubber bands (or bike tubes cut in ~1 inch sections) placed on the brake levers to decrease natural motion between bike and rack and fully secure the VelociRAX's built-in anti-rattle system.

Orders ship in 3-5 business days